Mead Binary Valves
Mead Fluid Dynamics
The USV-100 provides alternating outputs from a single input port.The valve has two outputs which are selected alternately by applyinga pulsing, on-off air signal to the input port. USV-100 will not function properly with a sustained signal.When pressure is applied to port 1, it flows through the valve to provide an output at port 2. When the pressure is released from port 1, the valve changes over so that when pressure is next ap-plied at port 1, air flows out through port3. Release of the pressure again changes the valve back to its original position. Therefore, each time pressure is applied and released to port 1, outputs 2and 3 change over. Note:The air signal must be fully exhausted to enable the valve to change over properly.
Technical Detail Specifications
1 variations of this product are available.